loading
reading
writing
saving
searching
.5in 1000psi tubing, polyproylene, polyethylene plastic, semi rigid .5 - $65 (San Diego)
QR Code Link to This Post
1/2 inch (1/2in) 60-70 Ft Polyethylene Hard Plastic Tubing, 1000 PSI USA Made,
.5" Polypropylene Solvents Gas Oil Resistant 3m ITW, Liquid Transfer Tube, PEX, cross linked polyethylene
60 to 70 ft. Of half inch hard plastic tubing made in USA, industrial grade rated and made, like 3m.
1/2" OD LLDPE Polyethylene Tubing is produced in Linear Low Density Polyethylene (LLDPE) for cold and intermittent hot water applications such as beverage dispensing, potable water or pneumatic applications. This tubing is made from FDA compliant materials and is NSF International Standard 51 & 61 certified. This tubing provides excellent resistance to environmental stress cracking as measured by ASTM D-1693.
NOTE: LLDPE tubing is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. LLDPE tubing is suitable for pneumatic applications providing pressure is maximum 150 psi @ 70º F. At elevated temperatures 120º F+, mineral oil will degrade LLDPE tubing should be periodically checked and replaced if necessary.
It is a hard very lightly semi-flexible material.
Specs are 1000 PSI and made in USA rated and qualified.
to transfer liquids solutions solvents gas or oils (but limited). This is the kind of tubing you want. for beer, jgj, pneumatic air tools, or general plastic cylinder type projects, piping, hose, hosing, inlet outlet pipe tube for house or garage projects, water line, liquids